True Food Service Equipment, Inc.
INSTALLATION / OPERATION INSTRUCTIONS
OPTIONAL (INSTALLING OPTIONAL FORMICA KIT)
FORMICA KIT INSTALLATION:
FORMICA KIT COMPONENTS:
(2)Formica Top End Panels 103/4"w x 33"h (27.3 cm x 83.8 cm).
(2)Bottom End Panels
(1)left side, (1) right side (Formica glued to black plastic panel with 4 key hole slots).
(1)Formica Front Panel
width will vary x 75/8"h (19.4 cm)
NOTE
Please use care when installing the Formica. Formica can chip, crack, or break.
NOTE
Refer to image 1 for placement of Formica panels.
A.Install the front Formica panel.
Be sure bottom end panels are off in order to install front panel. Slide front panel into top and bottom tracks on the front of the cabinet. Make sure panel is even on both left and right end of the cabinet (images 1 & 2).
B.Install the top end Formica panels (one on each side.
NOTE
After installing the bottom end pieces the top end panel will stay in place.
C.Install the bottom end Formica panels (one on each side.
(Formica is
Line up the four keyhole slots in each bottom end piece to the (4) screws on the side of the cabinet. Slip the (4) large keyholes from the bottom end piece over the (4) screws. Then push down to fasten the bottom end piece onto the cabinet (images 1 & 3).
NOTE
The bottom left and right pieces are not the same. The taller part of the bottom end piece goes to the rear of the cabinet as shown in image 3.
Be sure bottom end panels are off in order to install top end Formica panel. Both top end panels are the same
STEP A
size so they each can be used for left or right of the cabinet.
Slide panel up into black plastic tracks on the | 1 | |
top side panel of each end of cabinet (images | ||
STEP C | ||
1 & 3). | ||
| Four keyholes | |
| on backside. |
|
|
|
| Formica. |
|
|
|
|
|
| 2 | Tracks to |
|
|
|
|
| hold Formica. STEP B |
| |
Formica top | Formica top | Formica bottom |
| STEP A |
|
|
end panel | end panel | end panel will lock |
| Side view of Formica sliding |
| |
will slide up | will rest on | through keyholes on |
|
| ||
| into place for front panel and |
| ||||
into plastic | screw. | backside of bottom | 3 |
| ||
tracks. |
| end piece. | top end panel. |
| ||
|
|
|
|
| ||
12 | ............ www.truemfg.com | 12 | ||||
