True Food Service Equipment, Inc.
MAINTENANCE, CARE & CLEANING
LIGHT BULB REPLACEMENT
SHELF MOUNTED BULB REPLACEMENT:
WARNING
When replacing a light bulb make sure power to the unit is either turned off or unplugged.
A.Unplug the light assembly from the receptacle on the interior side wall. Remove shelf and light assembly from cabinet.
B.Remove the lampshield by gently squeezing the sides together and rotating out (image 1).
C.Remove bulb from the corded end of assembly by holding the bulb and gently pulling up on spring loaded lampholder which will allow enough clearance to remove bulb (image 2).
NOTE
All spring loaded lampholders are located on the left side of the cabinet as you face the front.
NOTE
Please be aware of your local ordinances for dis- posal of old florescent bulbs. These bulbs should be disposed of in a safe and proper manner.
D.Install new bulb using spring loaded lamp- holder.
E.Reinstall light assembly and shelf. Plug cord into side wall receptacle.
INTERIOR TOP BULB REPLACEMENT:
WARNING
When replacing a light bulb make sure power to the unit is either turned off or unplugged.
A.Remove the lampshield by gently squeezing the sides together and rotating out (image 3).
B.Remove bulb by gently pushing bulb back into spring loaded lampholder which will allow enough clearance to remove bulb (image 4).
C.Install new bulb using spring loaded lamp- holder.
D.Reinstall light lampshield by sliding rear "U" channel of lampshield over metal bracket and gently squeezing lampshield to fit front "U" channel over front metal bracket (images
E.Image 7 shows assembly properly installed.
➟
➟ |
|
| |
1 |
| 2 | |
|
|
|
|
Squeeze lampshield and |
| Remove bulb by gently | |
rotate out. |
| pulling up on spring | |
|
|
| loaded lampholder. |
|
|
| ➟ | ➟ |
3 |
| |
|
|
4
Squeeze lampshield and
rotate out.Remove bulb by gently pushing bulb into spring loaded lamp- holder.
➟ |
|
|
|
5 |
| 6 |
|
|
|
|
|
Squeeze lampshield "U" | lampshield "U" channel | ||
channel into position | in position over metal | ||
over metal bracket. | bracket. |
7
Interior top light assembly properly installed.
14 | www.truemfg.com | 14 |