True Manufacturing Company THDC-6, TDC-47 Optional Dipwell For Tdc Models, Illustration

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

OPTIONAL DIPWELL FOR TDC MODELS

(Installing Dipwell):

True Dipping Cabinets come standard with pre-installed riv-nut holes to attach an optional dipwell. There are multiple riv-nut holes for dipwell locations on the cabinet. Locate which area you want the dipwell installed then proceed with the directions below. (See image 1).

A. Remove the dipwell backplate from one of two boxes that contain the dipper well assembly.

B. Two Phillips pan head machine screws are provided in the kit to mount the backplate to the cabinet with the Inlet Tube Clip and Inlet Tube. (See image 2 and illustration 1).

C. After attaching the dipwell bowl to the backplate connect the drain tube to the bowl and run it to a floor drain.

D. Assemble the Plastic Tube to the Barrel Valve and then onto the Inlet Tube. (See illustration 1).

E. Have a plumber tap the Saddle Valve Assembly into the copper water line.

Riv-Nut

Locations

Riv-Nut

Locations

Image 1 (Riv-nut locations).

10" Deep Drawn "Dipwell"

Overflow

Tube

Illustration 1

1/4"-20nc x 5/8"

Backplate

S.S.T. Pan Head

Machine Screw

Inlet Tube

Inlet

Tube

Clip

Backplate

Image 2 (Dipwell Backplate installation).

Leather Gasket
Tail Piece		Male Connector
( 1” Connection		Assembly
will be needed for				Ferrule
the drain).		Barrel Valve
Coupling Nut		Male Connector
		Assembly
	1/4” Plastic Tubing
	(leading toward water source
	[saddle valve assembly])
				Barrel
				Valve
			Male
		Tail
		Piece	Connector
			Assemblies

Ferrule

Leather Gasket Coupling Nut

Saddle Valve Assembly

Image 3 (Dipwell bowl installation).

10" Deep Drawn "Dipwell"

Overflow Tube

S.S.T. Pan Head

Machine Screws

Inlet Tube Clip

Inlet Tube

7 www.truemfg.com 7