Arraying and Rigging
TCS series
ICC-4H KIT 07G0355
A pair of steel inter-cabinet couplers for linking two TCS-B15 subs together. These can be either TCS-B15A or TCS-B15B versions, but in a cluster both subs should the same type. The couplers fit into the recesses in the flyplates and are secured using the M10 bolts and washers that are supplied with the FP-2 flyplate kits.
ICC-5H 07G0360
A pair of steel inter-cabinet couplers for linking a TCS-152 cabinet to a TCS- B15B sub. Each box needs their respective FP-1 and FP-2 flyplate kits of course. The couplers are handed i.e. there are left and right versions. The couplers fit into the recesses in the flyplates and are secured with the M10 bolts and washers that are supplied with the FP flyplate kits.
ICC-6H 07G0365
A pair of steel inter-cabinet couplers for linking a TCS-122 cabinet to a TCS-B15A sub. Each box needs their respective FP-1 and FP-2 flyplate kits of course. As with the ICC-5H kit, the couplers are handed left and right. The couplers fit into the recesses in the flyplates and are secured with the M10 bolts and washers that are supplied with the flyplate kits.
ICC-2V 07G0330
A pair of steel inter-cabinet couplers for flying two TCS-122 or TCS-152 cabinets in a vertical column with one cabinet inverted to position the horns adjacent to each other. FP-1 kits are not needed to assemble this configuration; all that is required is one ICC-2V kit per hang.
The kit includes two plates, four M10 x 40mm bolts and four M10 spring washers.
TCS series Arraying and Rigging - Page 4
