Manuals / Turbosound / Home Audio / Speaker

Turbosound TCS-152, TCS-122 Important notes on rigging, Secondary Safeties, Safety Inspections

Models: TCS-122 TCS-152

1 8
Download 8 pages 33.59 Kb
Page 8
Image 8

Arraying and Rigging

TCS series

Important notes on rigging

As with all rigging, the flying of these arrays should only be carried out by a professional rigger.

The Turbosound rigging system has been designed and constructed to a high standard of safety, and tested to the most demanding of specifications. In order to ensure the highest safety standards, this information on the assembly and safe use of rigging accessories must be understood and followed.

Only use Turbosound recommended rigging accessories, which are specifically designed for their intended purpose. Do not use Turbosound rigging with other types or brands of loudspeakers. This practice may compromise safety standards and Turbosound will not be responsible for damage or injury so caused. Do not modify the rigging accessories, or use them in a way other than that described in this user manual. Rigging components supplied as part of a complete assembly are non- interchangeable and must not be exchanged with the component parts of any other assembly. The component parts of a Turbosound rigging accessory must only be assembled using the fasteners and methods of assembly recommended in this guide. The use of fasteners and methods of assembly not specified or approved by Turbosound may result in an unsafe rigging assembly. Welding, or any other means of permanently fixing rigging components to each other or to cabinet fixing points is not allowed. Rigging assemblies must only be assembled using the appropriate parts and fixings as specified in this manual using the specific mounting instructions. Rigging components or assemblies must only be fixed to Turbosound loudspeaker cabinets using the cabinet fixing points, assembly methods and fasteners specified in this guide and the specific mounting instructions. When assembling the loudspeaker array ensure that all fixings are securely tightened before lifting the array.

Secondary Safeties

All loudspeaker clusters flown in theatres, studios or other places of work and entertainment must, in addition to the principle load bearing means of suspension, be provided with an independent, and properly rated and securely attached secondary safety. Only steel wire ropes or steel chains of an approved construction and load rating may be used as secondary safeties.

Safety Inspections

Carefully inspect rigging systems components and cabinets for defects or signs of damage before proceeding to assemble a flown array. If any parts are damaged or suspect, DO NOT USE THEM.

Regular, more rigorous test and inspection of rigging components must also be carried out. Safety legislation and test and inspection requirements will vary from country to country. In most cases, annual independent test and inspection by a suitably approved and qualified inspector will be required. Users must ensure compliance with all applicable safety requirements. Turbosound recommends regular safety inspections and further recommends that a logbook be kept detailing the test and inspection history of each Turbosound rigging accessory. Always wear protective headwear, footwear and eye protection in accordance with local regulations. Anyone involved in flying ANY sound system should take note of the following advice:

The rigging of a flown sound system may be dangerous unless undertaken by qualified personnel with the required experience and certification to perform the necessary tasks. Fixing of hanging points in a roof should always be carried out by a professional rigger and in accordance with the local rules of the venue. The house rigger and/or building manager must always be consulted.

TCS series Arraying and Rigging - Page 8

Page 7
Page 8
Image 8
Turbosound TCS-152, TCS-122 manual Important notes on rigging, Secondary Safeties, Safety Inspections
Page 7

TCS-122, TCS-152 specifications

Turbosound is renowned in the professional audio industry for producing high-quality sound reinforcement systems, and their TCS series, including the TCS-152 and TCS-122, exemplifies this commitment to excellence. These models are designed for a variety of applications, from live sound performances to installed sound systems in venues and event spaces.

The TCS-152 is a versatile 15-inch two-way passive loudspeaker. It features a 15-inch low-frequency driver that delivers powerful bass response, making it ideal for music playback and vocal reproduction. The high-frequency range is achieved through a 1-inch neodymium compression driver. Both drivers work in concert to provide a smooth and wide frequency response, ensuring clarity and detail at all output levels.

On the other hand, the TCS-122 is a compact 12-inch two-way passive loudspeaker designed for clear mid-range and excellent vocal reproduction. It is equipped with a 12-inch low-frequency driver and a 1-inch neodymium compression driver, providing a tonal balance that is perfect for speech applications and music alike. The compact design makes the TCS-122 suitable for smaller venues, where space is a premium.

One of the main features of both models is the advanced cabinet design. Constructed from durable reinforced birch plywood, they are built to withstand the rigors of touring and installations. The cabinets are equipped with multiple mounting points, allowing for a variety of rigging options, making them adaptable for flying or ground stacking configurations. This flexibility ensures that users can optimize sound coverage in different environments.

Additionally, Turbosound’s proprietary Waveguide technology significantly enhances the dispersion pattern of the high-frequency drivers in both models. This ensures that sound is evenly distributed throughout the audience area, minimizing dead spots and providing a consistent listening experience from various angles.

Moreover, both the TCS-152 and TCS-122 are designed with user-friendly aspects, such as a sleek, unobtrusive design, making them visually appealing for any setting. Advanced thermal management features protect components from overheating during extended use, contributing to their reliability.

In summary, Turbosound’s TCS-152 and TCS-122 loudspeakers offer a combination of robust construction, advanced technology, and superb audio performance. Whether in a live sound context or a fixed installation, these models are engineered to deliver exceptional sound quality that meets the demands of today’s audio professionals. With their versatility and high-performance characteristics, they are a valuable addition to any sound system.