Turbosound TQ-115DP, TQ-310DP, TQ-425DP, TQ-308DP TQ-315DP and TQ-445DP connector panel functions

user manual

QLight™ DP series

TQ-315DP and TQ-445DP connector panel functions

1 2 3 4 5 6 7 8 9 10

1.AUX connection – RS232 port used for updating settings or firmware.

2.Signal link – lockable 3-pin XLR line input socket connects to audio mixer. Fully balanced, pin 2 Hot, pin 3 Cold and pin 1 not connected.

3.Signal link – lockable 3-pin XLR line output socket connects to additional cabinets. Fully balanced, pin 2 Hot, pin 3 Cold and pin 1 not connected.

4.Mode switch – used to change the low frequency tuning when used with QLight™ series subwoofers or for stand-alone operation.

5.Power – blue LED indicates when AC power is applied to the amplifier module.

6.Limit (low) – red LED used to indicate LF limiting, self test and protection.

7.Limit (high) – red LED used to indicate MF/HF limiting, self test and protection.

8.Fuse – AC line fuse. Replace only with 10A 230V anti-surge fuse.

9.Power – Blue LED indicates when AC power is applied to the unit.

10.AC Mains connection – accepts Neutrik PowerCon® 3-pin cable-end connector.

QLight DP series manual page 12