User’s Guide
10
1. Connect your powered speakers, microphone, and any other audio peripherals to the appropriate
inputs and outputs on the Montego DDL
2. Power-on your PC. After Windows boots, if the ―Found New Hardware Wizard‖ is displayed,
click on the Cancel button to end this process.
It is important that you
click on Cancel to
properly install your
sound card drivers!
3. Insert the Montego DDL CD into the CD ROM drive. If the installation menu does not appear
within 30 seconds, click on the ―My Computer‖ icon, double-click on the CD-ROM drive folder
to open it, and double-click ‗SETUP.EXE’ to run the setup program from the CD.
4. When the Montego DDL installation menu appears,
select Montego DDL Driver Setup. Then select
Montego DDL Drivers Setup from the next menu
list.
5. This installation procedure will install the Montego
DDL drivers, Control Panel and surround-sound
programs. When the install is completed, you will be
prompted to reboot the PC.
6. After rebooting, you may again run the setup
program from the CD to install the Voyetra demo
programs, if you wish.
If the following dialog box appears, explaining that the software has not passed Windows Logo
testing or does not have a Digital Signature, click "Continue Anyway" or "Yes" (depending on the
operating system).
Windows XP
Windows Vista/Windows 7
Please wait for the system to reboot to properly complete the installation!
While preparing for reboot, the PC may appear to be temporarily "frozen". Do not interrupt the computer at
this time. Wait a few minutes for the installation to complete. The wait time will vary depending on the speed
of your PC.