Intel II manual Installing the Scsi Backplane, Removing the Scsi Backplane

A

A

OM07053

Figure 28. Removing the SCSI Backplane

A.￿Screws

Installing the SCSI Backplane

1.Place the SCSI backplane component side to the hot-swap bay.

2.Insert and tighten the two center screws that hold the backplane to the hot-swap bay.

3.Place the plastic shroud on the back of the backplane.

4.Insert and tighten the four corner screws holding the plastic shroud and SCSI backplane to the hot-swap bay.

5.￿Install two hot-swap bay fans.

Working Inside the System 43