Pioneer DEH-P550MP installation manual Installing the Unit on a Left-Hand-Drive Car

Installing the Unit on a Left-Hand- Drive Car

Note:

•When the unit is installed on a right-hand-drive car, the horizontal positions are inverted.

1.Secure inner holder to the inner cir- cumference of the steering wheel with belt. (Fig. 16)

•Fit the inner holder to the steering wheel so that the arrow-marked side faces the driver as shown below.

Inner holder

Belt

Fig. 16

2.Cut the extra portion of the belt at the center of the inner holder. (Fig. 17)

Fig. 17

3. Install outer holder on the inner holder and secure with screws. (Fig. 18)

• Tighten the screws with the supplied hexago-
nal wrench.	English
Screw
Outer holder	Français

4. Install the remote control unit in Español

Fig. 18

the holder. (Fig. 19)

• When removing the remote control unit from the holder, move the corrugated release sec- tion toward the steering wheel and slide the remote control unit toward you.

Release Section

Fig. 19

12