Intel II manual Hot-swap Backplane, Removing the Scsi Backplane

Hot-swap Backplane

Removing the SCSI Backplane

1.Remove any hard drives installed in the hot-swap bay.

2.Remove the hot-swap bay from the chassis.

3.Remove the hot-swap bay fans.

4.￿Remove the four corner screws holding the plastic shroud and SCSI backplane to the hot-swap bay. Do not remove the two center screws.

A

A

B

A

A

OM07042A

Figure 27. Removing the Plastic Shroud

A.Screws

B.￿Threaded tabs on hot-swap bay

5.Remove the plastic shroud and set it aside.

6.Remove the two center screws holding the SCSI backplane to the hot-swap bay.

7.￿Remove the SCSI backplane, and place it component side up on a nonconductive, static free surface or in an antistatic bag.

42 Intel Astor II Server Chassis Subassembly Product Guide