1 System Description

Kit Contents

The Astor II chassis subassembly kit includes this Product Guide, a power cord, an I/O shield EMI gasket, two chassis feet, and three hardware bags:

Server board installation bag: includes three rubber bumpers, 13 standoff clips, and 13 retention screws.

Chassis intrusion switch bag: includes one intrusion switch/cable assembly, one mounting

￿￿screw, and three wire tie clips.

Internal/external peripheral mounting bag: includes four 5.25-inch external drive rails and mounting screws without washers (2 screws/rail x 4 + 2 for diskette = 10 total); mounting screws with washers for SCA2 hard drive caddies (4 screws/drive x 5 + 1 spare = 21 total); mounting screws with washers for chassis feet (2 screw/foot x 2 = 4 total); and gold colored mounting screws for IDE drives (4 screws/drive x 2 = 8 total).

Feature Summary

Table 1. Feature Summary

Feature

Description

Drive Bays

One 3.5-inch diskette drive bay, accessible from front.

 

Two 5.25-inch wide bays that are externally accessible, designed to hold half-

 

height standard removable media devices; the bays can be converted into a

 

single full-height bay.

 

Hot-swap bay for 3.5-inch hard disk drives: space for up to five 1-inch high,

 

SCA2 hard drives.

 

Two 3.5-inch wide bays that are not externally accessible, designed to hold

 

half-height IDE drives.

 

 

Expansion slot covers

Up to seven expansion slots can be used; every slot that does not have an

 

add-in board installed must have a slot cover installed.

 

 

Power supply

300 watt power factor correction (PFC) power supply, integrated cooling fan.

 

Detachable AC power cord.

 

 

Cooling

Three system fans inside the chassis and one power supply fan provide

 

cooling and airflow.

 

 

7

Page 7
Image 7
Intel II manual Kit Contents, Feature Summary