Setting up the XBOX 360 and Ear Force X4

STEP 1: Connect the XBOX to the X4 Transmitter

 

1. Connect the XBOX 360 Component

 

 

HD AV cable or S-Video AV Cable to

 

 

your Xbox as described in the Xbox

XBOX AV

 

user guide.

 

Cable

 

 

 

IN

2. Connect the TOSLINK digital optical

 

DIGITAL

cable (included with your X4) from the

 

 

 

digital output on the Xbox cable (1) to

 

OUT

the digital input on the transmitter (2) .

TOSLINK

 

 

 

 

cable Included

 

Step 2: Connect the power adapter

with the X4

X4 transmitter

 

 

rear view

1.Connect the DC power adapter to the X4 power socket and plug the power adapter into an AC outlet.

2.Press the power switch (3) and check if the power LED indicator on the front panel is on.

X4 power adapter

Caution: Use only the Power Adapter included with your X4. Failure to use the correct adapter can result in fire, damage to the unit or other hazards.

DC IN 9V

POWER

Step 3: Insert the X4 headphone batteries

1.Remove the battery cover (4) in the right ear cup by pushing in and down.

Insert the batteries with the positive side down.

2.Insert the included AAA batteries with the positive side facing down.

3.Replace the battery cover.

4.Press the headphones power button (5) and

check if the power LED is flashing. If not, check if the batteries are inserted correctly.

Step 4: Insert the mic boom

1.Insert the mic boom into the jack (6) so that the holes in the mic casing are facing your mouth.

2.Place the foam cover over the mic if desired.

 

Insert the boom so that the

Remove and replace

holes in the mic casing

and the marker on the jack

the foam cover so

are facing your mouth

you can see the

 

mic position

 

+AAABATTERY-

+AAABATTERY-

X4 To remove the battery cover, push in and push down.

ON - BASS BOOST - OFF

POWER

Ear Force X4 Operating Instructions. Version 1.0 Copyright 2008 Voyetra Turtle Beach, Inc. All Rights Reserved

Page 7