1.Insert the small jack on the Xbox Controller cable (included with your X4) into the Xbox jack (labeled with the controller symbol) on the X4 headphones.
2.Insert the “puck” side of the talkback cable into the Xbox controller. Make sure it sits snugly against the controller body and is not loose.
Insert the “puck” shaped plug into the headphone jack on the Xbox game controller
Use the Mic Mute switch to prevent your voice from being heard by other players
Use the puck volume control to adjust the chat level
you hear from other players
Insert the gray plug into the jack labeled with the Xbox controller symbol
1.From the Xbox 360 Dashboard, press the Xbox Guide button (the X button in the center of your controller) to access your Xbox Live Settings.
2.Navigate to the Personal Settings selection, and press the "A" button on the controller. Select Voice from the menu and press the "A" button again.
3.On the Voice screen, select "Play Through Headset" for Voice Output selection and set the volume to 10. You can fine tune game audio and chat volumes using the X4 headphone and game controller volume controls.
STEP 7: Configure the XBOX audio settings1.In the System section of the Xbox Dashboard, select Console Settings, then select Audio.
2.In the Audio Settings area, select Dolby Digital 5.1 to activate the Dolby Digital output.
3.Start your game and turn up the headphone volume (8) to a comfortable level.
Ear Force X4 Operating Instructions. Version 1.0 Copyright 2008 Voyetra Turtle Beach, Inc. All Rights Reserved
Page 8