Turtle Beach XP400 XP400 Headset - Left View, XP400 Headset

XP400 Headset - Left View

Power Button: Turn on the headset by pressing the

power button for a couple of seconds, then release.

You will hear 2 beeps and the power LED should start

ﬂashing. Turn off the headset by pressing the button

until the LED stays on and you hear 2 beeps, then

release. To enter Pairing Mode, press and hold the

power button for about 6 seconds until you hear 2 fast

beeps and the LED begins to ﬂash rapidly (see pg 6).

The headset will turn off after several minutes if there’s

no audio detected or if the transmitter is turned off.

Tone Button: Press this button to activate the different

EQ presets. A beep will indicate which preset is

selected. (see pg. 18)

Blast Limiter Button: Press this button to activate the

different Blast Limiter presets. A beep will indicate

which preset is selected. (see pg. 18)

Variable Mic Monitor: Adjusts the level of your voice

heard in the headset. (see pg. 19)

NOTE: Turning up the mic monitor may cause the mic to pick

up room sounds which will make the silence detector not

automatically shut off the headset when it’s not being used. If

the power is not automatically shutting down, turn down this

mic monitor control.

Xbox 360 Controller Jack: Used for optional wired chat

setup (see pg. 9)

Game Volume: Turn to adjust the game sound level.

Removable Microphone with Adjustable Boom:

The microphone can be removed from the headset

when chat is not required by detaching it from the boom.

To properly position the mic: Remove the foam cover, insert the

boom into the socket so the holes on the mic casing are facing

your mouth. Then replace the foam cover. The boom jack also

has a marker to indicate the proper mic position.

XP400 Headset - Right View

Bluetooth® Volume: Press Chat (+) or Chat (–) to adjust

Bluetooth volume level. A tone will sound each time the

volume level changes.

Bluetooth LED: Flashes blue once per second when paired

with a device. Flashes blue twice per second when not

paired with a device. Flashes blue and red quickly when in

pairing mode.

Bluetooth Multi-Function Button (BT MFB):

Powers on the Bluetooth and performs several other

functions described in the “Bluetooth” section. (see pg. 15)

NOTE: The Bluetooth feature is normally powered on. If it is not

paired to another device, it will automatically turn off after 5

minutes to conserve battery power.

Mic Mute Button: Press to toggle between muting and

unmuting the microphone. A high beep will sound when the

mic is unmuted and a low beep will sound when the mic

is muted. When using the XBA Bluetooth Adapter, the mic

can also be muted by double-pressing the button on the

puck. When using the optional Talkback cable, the mic can

be muted directly from the switch on the Talkback cable.

Headset Charging Port: The headset may be charged by

connecting this Mini USB input to a free USB port on your

gaming console using the included Headset Charging

Cable. (see pg. 17)

NOTE: The Headset Charging Cable included with the XP400

can only be used to charge the headset and cannot be used as a

standard USB data cable.

Charging LED: Turns red when charging and turns off

when charged.