78

Xbox 360® and PS3™ Setup
1. Connect the Digital Optical Cable
NOTE: Remove the protective caps from each end of the
optical cable before inserting it into the sockets.
2. Connect the Transmitter Power
1
2

XBOX 360 (Older Models)*

1. Connect the Digital Optical Cable*
(Requires XBOX 360 HDMI Audio Adapter, sold separately)
NOTE: Remove the protective caps from each end of the optical cable
before inserting it into the sockets.
2. Connect the Transmitter Power
* Older Xbox 360 console models do not include an optical output so an
Xbox 360 HDMI Audio Adapter cable is required (sold separately). If
your HDTV has an optical AUDIO OUT jack, you can use it to connect the
optical cable to the transmitter.
DIGITAL OUT
CONSOLE
1
2
1. Power on the Xbox 360 controller and plug the XBA into the
controller headset jack.
2. With the XBA powered-OFF, press and hold the button on the
XBA for 4 seconds to enter Bluetooth pairing mode. The LED will
begin to blink rapidly.
3. With the XP400 powered-ON, press and hold the Bluetooth
button (BT MFB) on the right ear cup for about 5 seconds to
power on the Bluetooth.

Connecting the XBA Bluetooth® Chat Adapter*

If this the first time you’ve powered-on the headset, the Bluetooth will automatically be in pairing mode.
If its not the first time the headset has been powered-ON, make sure the Bluetooth is powered-off and press and hold the BT MFB
button for about 5 seconds until you hear 3 fast beeps in the headset and the Bluetooth LED is flashing blue and red.
After a few seconds, the XBA and the XP400 will be paired. The XBA will automatically pair itself to the headset each time it’s powered
on so you will only need to complete the pairing process during initial setup.
* The XBA adapter is not compatible with the Xbox 360 chat pad and may not be compatible with third party controllers.

Xbox 360 Wireless Chat Setup

Xbox 360 (Slim) and PS3

Digital Optical Cable
(included)
Digital Optical Cable
(included)
Xbox 360
Audio Adapter Cable*
(sold separately)
Transmitter USB Cable Transmitter USB Cable
XBA Functions
Function Button Press LED
Power ON Single 1 blink / sec
Power OFF Hold 3 secs OFF
Mic MUTE Double Solid ON
Mic UNMUTE Double 1 blink / sec
Pairing Mode
(paired)
(not paired)
Hold 4 secs
2 blinks / sec
1 blink / sec
XBA Button
XBA LED