2.1Rack Mounting
The Transport GT24 can be mounted in a rack using the sup- plied rack mounting kit.
Rack mounting kit
Sliding Rails x 2:
Sliding Brackets x 4 (Front x 2, Rear x 2)
Mounting Ears x 2
Screws Kit x 1
Mounting Brackets x 4
2.1.1Installing the Server in a Rack
Follow these instructions to mount the Transport GT24 B2891 into an industry standard 19" rack.
NOTE: Before mounting the Transport GT24 in a rack, ensure that all internal components have been installed and that the unit has been fully tested. Maintenance can be performed on the unit while in a rack but it is preferable to install the device in a fully operational condition.
1.Screw the mounting ear to each side of Transport GT24 as shown using 2 screws from the supplied screws kit.
Mounting Ears
Chapter 2: Setting Up | 19 |
