Tyan Computer N3600QX warranty IDE Configuration Sub-Menu

3.7.2 IDE Configuration Sub-Menu

You can use this screen to select options for the IDE Configuration Settings. Use the up and down <Arrow> Keys to select an item. Use the <Plus> and <Minus> Keys to change the value of the selection options.

		BIOS Setup Utility
Main Advanced		PCI/PnP	Boot			Security	Chipset		Exit
IDE Configuration							While entering setup,
							BIOS auto detects the
							presence of IDE
Onboard IDE Controller				[Enabled]			devices. This displays
Serial-ATA Devices				[Device 0/1]			the status of auto
							detection of IDE
nVidia RAID Setup							devices.
Primary IDE Master
Primary IDE Slave
SATA0	(Dev5, Func0)						← → Select Screen
SATA1	(Dev5, Func0)
SATA2	(Dev5, Func1)						↑↓ Select Item
SATA3	(Dev5, Func1)						+/-	Change Option
Hard Disk Write Protect				[Disabled]			F1	General Help
							F10	Save and Exit
IDE Detect Time Out (Sec)				[35]			ESC	Exit
ATA (PI) 80Pin Cable Detection				[Host & Device]
Feature		Option					Description
IDE Configuration
Onboard IDE Controller		Enabled			Enable/Disable onboard IDE controller.
		Disabled
		Device 0/1
Serial-ATA Devices		Disabled			Configure serial ATA devices.
		Device 0
		Disabled			Enable/Disable device write protection.
Hard Disk Write Protect					This will be effective only if device is
		Enabled
					accessed through BIOS.
IDE Detect Time Out		0~35			Select the time out value for detecting
(Sec)		(at 5 interval)			ATA/ATAPI device(s).
ATA (PI) 80Pin Cable		Host & Device			Select the mechanism for detecting
		Host
Detection					80Pin ATA(PI) cable.
		Device

40