2.7 - Heatsink Installation Procedures
Type A: CAM LEVER (TYPE) INSTALLATION
1. After placing backplate and interface material under motherboard place heatsink retention frame on top of motherboard. Align plastic retention bracket screw holes with CPU back- plate standoffs.
Tighten screws to secure plastic retention bracket. Repeat for the other side. DO NOT OVER TIGHTEN.
2. After tightening screws secure metal clip to plastic retention bracket center tab. Repeat for the other side of heatsink.
3. After securing metal clip to plastic retention bracket center tab, push down on plastic clip to lock plastic clip to side tab.
25
http://www.tyan.com
