Tyan Computer S2877 warranty Apic

2Eh		1-3-4-3	. RAM failure on
		data bits of low byte of
		memory bus
2Fh	Enable cache before
		system BIOS shadow
30h		1-4-1-1	. RAM failure on
		data bits of high byte of
		memory bus
Code		Beeps / Description
6Ah	Display external L2 cache
		size
6Bh	Load custom defaults
		(optional)
6Ch	Display shadow-area
		message
6Eh		Display possible high
		address for UMB recovery
70h		Display error messages
72h		Check for configuration
		errors
76h		Check for keyboard errors
7Ch	Set up hardware interrupt
		vectors
7Eh		Initialize coprocessor if
		present
80h		Disable onboard Super I/O
		ports and IRQs
81h	Late POST device
		initialization
82h		Detect and install external
		RS232 ports
83h	Configure non-MCD IDE
		controllers
84h	Detect and install external
		parallel ports
85h		Initialize PC-compatible
		PnP ISA devices
86h.		Re-initialize onboard I/O
		ports.
87h	Configure Motherboard
		Devices
88h		Initialize BIOS Data Area
89h		Enable Non-Maskable
		Interrupts (NMIs)
8Ah		Initialize Extended BIOS
		Data Area
8Bh	Test and initialize PS/2
		mouse
8Ch		Initialize floppy controller
8Fh		Determine number of ATA
		drives (optional)
90h		Initialize hard-disk
		controllers
91h		Initialize local-bus hard-disk
		controllers

67h	Initialize Multi Processor
	APIC
68h	Enable external and CPU
	caches
69h	Setup System Management
	Mode (SMM) area
Code	Beeps / Description
A2h	Check key lock
A4h	Initialize Typematic rate
A8h	Erase F2 prompt
AAh	Scan for F2 key stroke
ACh	Enter SETUP
AEh	Clear Boot flag
B0h	Check for errors
B2h	POST done - prepare to
	boot operating system
B4h	One short beep before boot
B5h	Terminate QuietBoot
	(optional)
B6h	Check password (optional)
B9h	Prepare Boot
BAh	Initialize DMI parameters
BBh	Initialize PnP Option ROMs
BCh	Clear parity checkers
BDh	Display MultiBoot menu
BEh	Clear screen (optional)
BFh	Check virus and backup
	reminders
C0h	Try to boot with INT 19
C1h	Initialize POST Error
	Manager (PEM)
C2h	Initialize error logging
C3h	Initialize error display
	function
C4h	Initialize system error
	handler
C5h	PnPnd dual CMOS
	(optional)
C6h	Initialize notebook docking
	(optional)

68

http://www.tyan.com