2.7 - Heatsink Installation Procedures

Type A: CAM LEVER (TYPE) INSTALLATION

1. After placing backplate and interface material under motherboard place heatsink retention frame on top of motherboard. Align plastic retention bracket screw holes with CPU back- plate standoffs.

Tighten screws to secure plastic retention bracket. Repeat for the other side. DO NOT OVER TIGHTEN.

2. After tightening screws secure metal clip to plastic retention bracket center tab. Repeat for the other side of heatsink.

3. After securing metal clip to plastic retention bracket center tab, push down on plastic clip to lock plastic clip to side tab.

25

http://www.tyan.com

Page 25
Image 25
Tyan Computer S2877 warranty Heatsink Installation Procedures, Type a CAM Lever Type Installation