ENGLISH
Step 2.
Install the end seal.
Note: The end seal can only be used once, so do not install it until step 2D.
Heating Cable Construction
Clear plastic | Black core |
wrap | (bus wires inside) |
Braid | Blue jacket |
2A. Prepare the heating cable. | 2B. Push the braid back. |
Cleanly cut off one end of the heating cable.
2C. Remove the plastic wrap.
1"
(25 mm)
Push the braid back 1" (25 mm) from heating cable end.
2D. Install the end seal.
1"
(25 mm)
Cut and remove the clear plastic wrap. Do not cut into the blue jacket.
2E. Secure the braid.
Firmly push the end seal at least 3/4" (2 cm) onto the heating cable. Some gel may ooze out.
Slide the braid up against the end seal and wrap it securely with a 4" (10 cm) strip of glass fiber or vinyl tape.
4
in
mm
0
0
10
1
20
