There are two sheets, "Module Selection" and "Configuration Menu" shown initially at the bottom
Click on the button |
|
|
Load Module Data File |
| |
|
|
|
This will bring the module data file
import window as shown below in Figure 2.
Note that all module data files have .pwr extensions. If you have not already downloaded the module data files for the particular modules you wish to analyze, they will need to be downloaded before you can use the tool.
Choose the module that you want to use in your application by selecting the corresponding module data file. In this guide, we will use the JFW050A module as an example.
After highlighting the JFW050A.pwr file, click on the "OK" button or hit "ENTER". SAT will load the module data file and move to the Configuration Menu as shown in Figure 3. You may want to save SAT_v1.3.xls file under a different name so that the original one that you downloaded remains unchanged.
Fig. 2. Module data file import window
7