Samsung Complete Guide to Setting Up Your HT xq100 Stereo System

Installing the DVD player

1 Separate the rear cover(A). (A)

2 Remove the 1 screw of the cover(B).

(B)

3 Put the speaker cable connected to the Speaker OUT port into the left groove.

4 Put the cables connected to the Video OUT, Component OUT and Audio IN ports into the right groove.

5 Fasten the 1 screw on the cover(B).

6 Close the rear cover(A).

Connecting the optional Wireless Receiving Amplifier ENG

To connect the rear speakers wirelessly, you have to additionally purchase the wireless receiving module and TX card from your Samsung retailer.

Front Speaker (R) Front Speaker (L)

Center Speaker

Subwoofer

Rear Speaker (L)	Rear Speaker (R)
	WIRELESS RECEIVER MODULE

1	Connect the front, center and
	subwoofer speakers, referring to page 12.
2	Insert the TX card into the TX card
	connection port on the back of the
	main unit.
	• Hold the TX card so that the slanted side faces	TX CARD
	upward and insert the card into the port.

•The TX card enables communication between the

main unit and the wireless receiver.

3 Connect the left and right rear speakers to the wireless receiving module.

4 Plug the power cord of the wireless receiving module in the wall outlet and switch the power switch ‘ON’.

Caution

•Do not insert a card other than the TX card dedicated for the product. The product might be damaged or it may not be removed easily.

•Do not insert the TX card upside down or in reverse direction.

•Insert the TX card when the main unit is turned off.Inserting the card when it is turned on may cause a problem.

•If the TX Card is inserted in the main unit, the rear speakers don't output sounds.

13 14