Tyco Electronics 5500L, 4200L, 3200L, 4600L user manual On-Screen Display OSD

On-Screen Display (OSD)

Four OSD buttons are provided on the rear of the monitor to adjust various display parameters. The same buttons are provided on an optional OSD Control Box which can plug into the PS/2 connector on the touchmonitor connector panel.

The buttons and their functionality are:

Button	Function when OSD is not displayed:	Function when OSD is displayed:
Menu	Display OSD main menu	Return to previous OSD menu
	Display OSD Color/Luminance submenu	Increase value of selected parameter /
		select previous menu item
	Display OSD Audio submenu	Decrease value of selected parameter /
		select next menu item
Select	Display Video Source submenu	Select parameter for adjustment /
		select submenu to enter

Using the OSD buttons controls an on-screen graphical user interface which displays on top of your input video, allowing intuitive adjustment of the following display parameters:

Parameter	Available Adjustment
Brightness	Increase/decrease monitor brightness.
	Default: maximum
Contrast	Increase/decrease monitor contrast.
Clock	Allows fine adjustments of the panel’s pixel dot clock.
	Not applicable when using HDMI video or the Computer Module.
	Adjusting too far will adversely affect APR functionality.
Phase	Allows fine adjustments of the panel’s pixel dot clock phase.
	Not applicable when using HDMI video or the Computer Module.
	Adjusting too far will adversely affect APR functionality.
	Automatically adjusts the system clock to the input analog VGA video signal, affecting
Auto Adjust	the H-position, V-position, Clock, and Phase menu items.
	Not applicable when using HDMI video or the Computer Module.
	Adjusting too far will adversely affect APR functionality.
	Moves the image horizontally on the display in single-pixel increments.
H-position	Default: centered.
	Not applicable when using HDMI video or the Computer Module.
	Adjusting too far will adversely affect APR functionality.
	Moves the image vertically on the display in single-pixel increments.
V-position	Default: centered.
	Not applicable when using HDMI video or the Computer Module.
	Adjusting too far will adversely affect APR functionality.

User Manual – Interactive Digital Signage

SW601176 Rev D - Page 24 of 34