User Manual – Interactive Digital Signage
SW601176 Rev D - Page 26 of 34
Video Source
The monitor continually scans for active video from VGA, HDMI, and the Computer
Module. This adjustment selects which of those input ports should be given priority
to be displayed.
If there is no Computer Module plugged in, the options are: VGA Priority, HDMI
Priority
Default: HDMI Priority
When a Computer Module is plugged in, Computer Module HDMI is the only
displayable video source, and this adjustment is not available.
Audio Source
Selects which audio source is heard over the monitor’s speakers or headphone
output.
If there is no Computer Module plugged in, and the video source is HDMI, the options
are: Line In and HDMI.
Default: Line In.
If there is no Computer Module plugged in, and the video source is VGA, the only
option is Line In.
If a Computer Module is plugged in (and therefore the input video is Computer Module
HDMI), the options are: Elo Computer Module HDMI, Elo Computer Module Line In,
and Line In.
Default: Elo Computer Module HDMI.
ECM MDC
For situations in which multiple IDS+ECM Computer Module systems are
daisy-chained for MDC functionality, this option selects whether the system is the
master or one of the slaves of the daisy-chain.
The options are: Master, Slave
Default: Master
Note: This option only available when the ECM Computer Module is plugged in.
All TouchMonitor adjustments made through the OSD are automatically memorized as soon as
they are entered. This feature saves you from having to reset your choices every time the
touchmonitor is unplugged or powered off and on. If there is a power failure, the touchmonitor
settings will not default to the factory specifications.