The credit card reader reads all three stripes on a standard credit card or drivers license.
The credit card is read by sliding the credit card, stripe side toward the display through
the credit card reader forward or backward. There is a USB credit card reader only.
The Hub provides 4 internal USB ports to be used by the credit card reader, the finger-
print reader or barcode scanner, the touchscreen, and the customer display. The hub also
supplies two USB ports to the outside of the back of the 1529L for external use. The hub
is only used by the USB version of the 1529L. The 1529L is powered by a universal AC
power source or 12 VDC from external power source.
The barcode scanner comes in two different configurations. The first is a high-end
omni-directional scanner, which is also capable of reading 2-D barcodes. And the sec-
ond is a lower cost, yet efficient, 1-D scanner. Both scanners run on a USB interface.
Detailed LCD Display Performance Requirements15 inch TFT LCD Display Panel
Display Format 1024 x 768
Display area 15” 304.1mm(H) x 228mm(V)
Pixel Pitch 15” 0.297mm(H) x 0.297mm(V)
Contrast Ratio 400:1 typical
Brightness
LCD 350 cd/m2 (Typical)
AccuTouch 280 cd/m2 (Typical)
IntelliTouch 322 cd/m2 (Typical)
CarrollTouch 322 cd/m2 (Typical)
Surface Capacitive 298 cd/m2 (Typical)
Acoustic Pulse Recognition 322 cd/m2 (Typical)
Accutouch Transmission 82% typical
IntelliTouch Transmission 92% typical
IR Touchscreen Transmission 92% typical
Surface Capacitive Transmission 84% typical
Acoustic Pulse Recognition 92% typical
Response Time Tr=4 msec/Tf=12msec typical
Display Color 16.2 million colors, 6 Bit with dithering
Vertical Viewing Angle Typical Vertical Viewing Angle: 60deg(looking down)/40 deg(lookingup)
@ CR>=10
Horizontal Viewing Angle Typical Vertical Viewing Angle: 60deg(looking down)/60 deg(lookingup)
@ CR>=10
1-2 Elo Touchmonitor User Guide