Tyco Electronics P5200, P7200 8.3 DISPLAY , 8.4 RADIO STATUS ICONS

MM23772, Rev. F

28

8.3 DISPLAY

The P7200 and P5200 display (Figure 8-2) is made up of 3 lines. Lines 1 and 2 contain twelve

alpha-numeric character blocks each. The 3rd line displays radio status icons. If programmed, the display

backlighting will illuminate upon power up or when operating radio controls. See the operation sections

of this manual for specific display characteristics.

Figure 8-2: Radio Display

8.4 RADIO STATUS ICONS

Status Icons indicate the various operating characteristics of the radio. The icons show operating modes

and conditions and appear on the third line of the display (see Table 8-2). The battery charge indicator

illustrates approximate level only, based on battery voltage.

Table 8-2: Status Icons Descriptions

ICON DESCRIPTION

Steady – Indicates received signal strength. Appears in the 1st and 2nd positions in

OpenSky mode.

Steady – Radio is data registered. Appears in the 3rd position in OpenSky mode.

Steady – Stealth mode is enabled (all tones and display backlight is disabled, voice is still

heard). Appears in the 4th position in OpenSky mode.

Steady – Indicates the radio is transmitting or receiving an encrypted voice call. Appears

in the 6th position.

Displayed in position 8 on the 3rd line of the display when Scan Mode is Normal or Fixed

and is not be displayed when the Scan Mode is None.

VTAC Connection Indicator – Indicates the client is connected to a VTAC. Indicates the

client is connected to a VTAC. Appears in the 8th position in OpenSky mode.

Steady – Indicates Selective Call mode. Appears in the 11th position in OpenSky mode.

Steady – Battery charge indicator. Appears in the 12th position in OpenSky mode.

Flashing – Low battery indicator. Appears in the 12th position in OpenSky mode.

Animated – VTAC Scan icon. Indicates the radio is scanning for a VTAC during XCOV or

XCOV-TG mode. Once the radio attaches to a VTAC, the radio hides the icon. Appears in

the 7th position in OpenSky mode.

(P7230 Only) Steady – Visible when the P7230 model radio is traversing options using

the  and  buttons. Appears in the 5th position in OpenSky mode.

Contents

Main MM23772, Rev. F Page Page Page Page Page Page Page 1 SAFETY CONVENTIONS MM23772, Rev. F 2 SAFETY TRAINING INFORMATION 2.1 RF EXPOSURE GUIDELINES MM23772, Rev. F 2.2 ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY MM23772, Rev. F 3 OPERATING TIPS 3.1 EFFICIENT RADIO OPERATION 3.1.1 Antenna Care and Replacement 3.1.2 Electronic Devices MM23772, Rev. F 3.1.3 Aircraft 3.1.4 Electric Blasting Caps 3.1.5 Potentially Explosive Atmospheres MM23772, Rev. F 4 BATTERIES 4.1 CONDITIONING BATTERY PACKS 4.1.1 Conditioning NiMH Battery Packs 4.1.2 Conditioning NiCD Battery Packs 4.1.3 Additional Information 4.2 CHARGING BATTERY PACKS 4.3 BATTERY PACK USAGE MM23772, Rev. F 4.4 CHANGE THE BATTERY PACK 4.4.1 Remove the Battery Pack 4.4.2 Attach the Battery Pack 4.5 BATTERY DISPOSAL MM23772, Rev. F 5 INTRODUCTION Page Page 6 OPTIONS AND ACCESSORIES MM23772, Rev. F 23 DESCRIPTION PART NUMBER 7 CHANGE OPERATING MODE MM23772, Rev. F 8 OPENSKY OPERATION 8.1 POWER ON/OFF AND VOLUME CONTROL 8.1.1 Power ON/OFF 8.1.2 Volume Control 8.2 CONTROLS MM23772, Rev. F 8.2.1 Buttons and Knobs Page 8.3 DISPLAY 8.4 RADIO STATUS ICONS 8.5 TRI-COLOR LED 8.6 LOG IN TO THE NETWORK MM23772, Rev. F 8.7 LOG OFF THE NETWORK 8.8 PERSONALITY 8.8.1 Profiles 8.8.2 Talk Groups MM23772, Rev. F 8.9 OPENSKY DISPLAY OVERVIEW 8.9.1 Displays Top Line 8.9.2 Displays Second Line 8.9.3 Dwell Display 8.10 ALERT TONES 8.11 BASIC MENU STRUCTURE Page 8.12 ERROR MESSAGES PLS LOGIN MM23772, Rev. F 37 8.13 KEYPAD 8.13.1 Keypad Function Commands (P7270 Only) MM23772, Rev. F 38 8.13.2 Quick Buttons (P7270 Only) 8.13.3 LOCK/UNLOCK the KEYPAD 8.13.4 Dual-Tone Multi-Frequency (P7270 only) Page Page MM23772, Rev. F 8.20.2 Transmit a Voice Call 8.21 ADJUST AUDIO TREBLE LEVEL 8.22 TALK GROUP LOCK OUT Page MM23772, Rev. F 8.23.2 Change Active Scan Mode 8.23.2.1 Duration of Scanning Mode Selections MM23772, Rev. F 8.23.3 Scan Priority 8.24 MAKE SELECTIVE CALLS MM23772, Rev. F 8.24.1 Manually Dialing a Selective Call (P7270 Only) 8.24.2 Selective Call Using Speed Dial MM23772, Rev. F 8.24.3 Accept a Selective Call 8.25 SELECTIVE ALERTS 8.25.1 Define Messages MM23772, Rev. F 8.25.2 Send a Message 8.25.2.1 Select a Destination Using the Keypad (P7270 Only) Page MM23772, Rev. F 8.26.2 Receive an Interconnect Call 8.27 EMERGENCY COMMUNICATIONS 8.27.1 Declare an Emergency Call or Alert MM23772, Rev. F 8.27.2 Receive an Emergency Call 8.27.3 Dismiss an Emergency 8.27.4 Clear an Emergency MM23772, Rev. F 8.28 OPENSKY ENCRYPTION (P7200 ONLY) 8.28.1 Automatic Encryption 8.28.1.1 Using Automatic Encryption 8.28.2 Manual Encryption (P7270 Only) MM23772, Rev. F 8.29 DYNAMIC REGROUPING 8.30 GPS COORDINATES 8.31 V-TAC FUNCTIONS 8.31.1 Extended Coverage Modes (XCOV and XCOV-TG) MM23772, Rev. F 8.31.2 Change Between Extended Coverage Modes 8.31.3 Use the XCOV Mode 8.31.3.1 Manually Access the XCOV Mode MM23772, Rev. F 8.31.4 Use the XCOV-TG Mode 8.31.4.1 Radio Limitations Using XCOV-TG 8.31.4.2 Access the XCOV-TG Mode Page Page 9 EDACS AND P25 TRUNKED OPERATION 9.1 TURN ON THE RADIO 9.2 CONTROLS MM23772, Rev. F 9.2.1 Buttons and Knobs Page Page 9.3 DISPLAY 9.4 RADIO STATUS ICONS 9.5 TRI-COLOR LED 9.6 STATUS MESSAGES MM23772, Rev. F 9.7 ERROR MESSAGES DSP ERR ERR=XXXX ERR x 9.8 ALERT TONES Page Page Page Page MM23772, Rev. F 9.18.1 Menu Item Selection Process or to scroll nor is an additional press of the button required. 70 Table 9-6: Information Display MM23772, Rev. F 9.19 DIGITAL VOICE OPERATION 9.19.1 Clear Mode 9.19.2 Digital Mode 9.19.3 Private Mode (P7200 Only) Page MM23772, Rev. F 9.19.4.2 Transmit an Encrypted Call 9.19.4.3 Scanned Group Calls 9.20 SCAN TRUNKED GROUPS 9.20.1 Turn Scan On and Off Page Page 9.21 SCAN TRUNKED SYSTEMS MM23772, Rev. F 9.21.3 ProScan 9.22 EMERGENCY OPERATION 9.22.1 Receive an Emergency Call 9.22.2 Declare an Emergency Call 9.22.3 Clear an Emergency Call Page Page Page MM23772, Rev. F 9.24.2.2 Direct Dial Phone Calls (P7270 Model Only) 9.24.3 Dual-Tone Multi-Frequency: Overdial/Conventional Mode Page MM23772, Rev. F 9.26.2 Message Operation 9.27 DYNAMIC REGROUP OPERATION ENTRY 9.27.1 Emergency Operation 9.28 MACRO KEY OPERATION MM23772, Rev. F 9.29 PORTABLE DATA 9.29.1 Displays 9.29.2 DATA OFF Operation 9.29.3 DATA ON Operation 9.29.4 Exit Data Calls Page 10 PROJECT 25 (P25) CONVENTIONAL OPERATION 10.1 TURN ON THE RADIO 10.2 CONTROLS MM23772, Rev. F 10.2.1 Buttons and Knobs Page Page 10.3 DISPLAY MM23772, Rev. F 10.3.1 Radio Status Icons 10.4 TRI-COLOR LED 10.5 STATUS MESSAGES MM23772, Rev. F 10.5.1 Error Messages DSP ERR ERR=XXXX 10.6 ALERT TONES 10.7 SYSTEM SELECTION Page Page Page Page 98 The TX POWER menu item, when selected, toggles LOW/HIGH power. It does not use or to scroll nor is an additional press of the button required. Table 10-5: Menu Item Information MM23772, Rev. F 10.17 DIGITAL VOICE OPERATION 10.17.1 Clear Mode 10.17.2 Digital Mode MM23772, Rev. F 10.17.3 Private Mode (P7200 Only) 10.17.3.1 Display the Currently Used Cryptographic Key Number 10.17.3.2 Key Zero MM23772, Rev. F 10.17.4 Private Operation (P7200 Only) 10.17.4.1 Receive an Encrypted Call 10.17.4.2 Transmit an Encrypted Call 10.17.4.3 Scanned Group Calls MM23772, Rev. F 10.18 GROUP CALLS IN P25 MODE 10.18.1 Transmit a Group Call 10.18.2 Receive a Group Call 10.19 INDIVIDUAL CALLS IN P25 MODE 10.19.1 Transmit an Individual Call 10.20 EMERGENCY GROUP CALLS IN P25 MODE 10.20.1 Declare an Emergency Group Call 10.20.2 Receive an Emergency Group Call 11 CONVENTIONAL OPERATION 11.1 CONTROLS MM23772, Rev. F 11.1.1 Buttons and Knobs Page Page MM23772, Rev. F 11.2 DISPLAY 11.2.1 Radio Status Icons MM23772, Rev. F 11.3 TRI-COLOR LED ERR x 11.4 STATUS MESSAGES 11.4.1 Error Messages DSP ERR ERR=XXXX Page Page Page Page Page 115 Table 11-5: Menu Item Information 11.17 RECEIVE A CALL 11.18 TRANSMIT A CALL 12 TECHNICAL ASSISTANCE 12.1 IMMERSIBLE P7200 118 13 BASIC TROUBLESHOOTING BATTERY WARRANTY WARRANTY