Tyco Electronics P5200, P7200 - page 66

MM23772, Rev. F
66
METHOD 2: (P7270, P7250, and P5250 model radios) From keypad: If group selection is
programmed as the primary function of  and  select a group by pressing
 or  to scroll through the group list. The display registers the new group
name on line two.
METHOD 3: (P7270 model radios) Direct Access: Press  to enter the group select mode.
Press the numeric key mapped to the desired group. Press . The radio will
move to the selected group.
METHOD 4: (P7230 model radios only) If programmed for groups, press the  button to
change groups. The display registers the new group name on line two. I
f
programmed for channels, press the  button to change the channel. The
display registers the new channel.
9.11 MODIFY SCAN LIST
9.11.1 P7270 Model
1. Press  to toggle scan OFF and verify is not displayed.
2. Select group or channel.
3. Press  once to remove group or channel from list.
4. Press  once to add as a normal group or channel.
5. Press  twice to add as a Priority 2 group.
6. Press  three times to add as a Priority 1 group.
7. Press  to re-start scanning.
9.11.2 P7250 and P5250 Models
1. Press  to toggle scan OFF and verify is not displayed.
2. Select group or channel.
3. Press  once to remove group or channel from the list.
4. Press  once to add as a normal group or channel.
5. Press  twice to add as a Priority 2 group.
6. Press  three times to add as a Priority 1 group.
7. Press  to re-start scanning.