Tyco Electronics P5200, P7200 8.11 BASIC MENU STRUCTURE

MM23772, Rev. F
33
8.11 BASIC MENU STRUCTURE
Table 8-4 illustrates the basic P7200 and P5200 OpenSky menu structure. Menu items will vary
depending upon system programming, radio hardware, and optional configurations. All menus except the
dwell display menu can be turned off by network administration personnel. Scroll through available menu
options using the  or  buttons.
To traverse the menu options with a P7230 Select Model radio, press  or  to
scroll through menus. Press and hold  to enter options mode. Press  or  to
scroll through available options using  or . Press and hold  to select option.
Table 8-4: Basic P7200 and P5200 OpenSky Menu Structure
MENU
NAME RADIO DISPLAYS USAGE NOTES
To/From Dwell
Display
 
Engineering
Display
bit-error rates
and RSSI data Displays radio system connection data. For engineering use.
 
Silent
Emergency “SilentEmerg” Use  or  to toggle between OFF/ON. Press  to enable.
 
Operating Mode “App Mode” Use  or  to choose an available mode (OTP, OCF, or ECP). Press and confirm
(Y/N) with  or  and  again.
 
GPS Fix “GPS”
GPS latitude and longitude position of currently tuned-to base station [“GPS (Site)”] or
V-TAC (“GPS”) scrolls across top line of the display. “GPS (Aged)” indicates VTAC
coordinates haven’t been updated for more that 2 minutes.
 
User ID “User ID” User’s identification/name scrolls across top line of the display (if programmed).
 
IP Address “IP Address” Radio’s Internet Protocol (IP) address scrolls across top line of the display.
 
Station
Identification “Station ID” Station’s identification/name scrolls across top line of the display (if programmed).
 
Stealth Mode
(display backlight
is disabled)
“StealthMenu” Use  or  to turn Stealth Mode “On” or “Off.” See Section 8.17 for more
information about Stealth Mode.
 
Treble Level “Treble Menu” Use  or  to choose speaker treble level (LOW, MEDIUM, MEDHIGH, or HIGH).
Press  to return to dwell display.
 
Display
Brightness “Bright Menu” Use  or  to brighten or dim backlighting. Press  to return to dwell display.
 
Side Tone Level “Side Menu” Use  or  to choose side tone level (OFF, LOW, MED, or HIGH). Press to
return to dwell display.
 
See Next Page