Light Bulb Replacement
To replace the light bulb in your
2 |
1 |
ULIN_0001_A |
Figure 14
1.Grasp the edges of the light housing lens
(Figure 14, 1) opposite the exposed tab and gently push the lens toward the tab (Figure 14, 2).
2.Pull the edge of the lens down (Figure 14, 1) and swing it out of the light housing.
IMPORTANT
ALWAYS use a genuine
3.Replace the bulb only with a genuine
4.Replace the lens by first inserting the tab side back into the housing at a slight angle. While gently pushing the lens towards the tab end, push the free end up into the housing, and release when you will hear a snap/click.
7 Service
Before Calling for Service
If your
If Service is Required
If you do not understand a troubleshooting remedy, or your product needs service, contact
You will be asked for your product Model and Serial Numbers. This information should be recorded inside the front cover of this guide, following the products original purchase. It also appears on the Model and Serial number plate located on the upper right or rear wall of the interior of your product.
Replacement Parts
When you need replacement parts, always request that genuine
2175DWRR | 13 |