To defrost:

1.Turn the unit off.

2.Remove all products from the interior and leave the drawers in an open position (2" (5 cm) minimum).

3.Allow the frost to completely melt naturally. Clean the interior and all removed components using a mild non- abrasive detergent and warm water solution applied with a soft sponge or non-abrasive cloth. NOTE: DO NOT use any solvent-based or abrasive cleaners. They will discolor or damage the interior.

4.Dampen a soft sponge or non-abrasive cloth in clean water and wipe down the cabinet interior and removed components to remove any detergent residue. Rinse the sponge or cloth in clean water and repeat as necessary until the cabinet and components are clean.

5.When the interior is dry, turn the unit on.

Condenser Cleaning

Interval - Every Three Months

To maintain operational efficiency, keep the front grille free of dust and lint and clean the condenser every three months. Depending on environmental conditions, more or less frequent cleaning may be necessary.

WARNING

Disconnect electric power to the unit before cleaning the condenser.

To remove and replace the grille for access to the condenser fins, follow this procedure:

1

2

ULIN_0203_A

Figure 11

1.Disconnect electrical power to the unit.

2.Loosen two screws (Figure 11, 1) completely.

NOTE: Screws are held in the grille by o-ring retainers, and will not come free of the grille.

3. Remove the grille.

WARNING

DO NOT touch the condenser fins. The condenser fins are SHARP and can be easily damaged.

CAUTION

DO NOT use any type of cleaner on the condenser unit.

4.Clean the condenser coil (Figure 11, 2) using a soft brush with a “combing” action or vacuum cleaner. Do not touch the condenser coil.

5.Position the grille to align the mounting screws with the holes in the cabinet.

6.Secure, but do not over-tighten both grille screws.

7.Reconnect power to the unit.

Leveling

NOTE: It is recommended that the unit is level.

ULIN_0045_A

Figure 12

1.Use a level to check the levelness of the unit from front to back and from side to side. Place the level along top edge and side edge as shown (Figure 12).

ULIN_0046_A

Figure 13

2.If the unit is not level, adjust the feet on the corners of the unit as necessary (Figure 13).

3.Check the levelness after each adjustment and repeat the previous steps until the unit is level.

12

2175DWRR

Page 11 Page 13
Page 12
Image 12
U-Line 2175DWRR manual Condenser Cleaning, Leveling
Page 11 Page 13

2175DWRR specifications

The U-Line 2175DWRR is an innovative and stylish wine cooler that has gained popularity among wine enthusiasts and home entertainers alike. Designed to enhance the wine storage experience, this model combines modern aesthetics with superior performance, making it a suitable addition to any home or hospitality setting.

One of the standout features of the U-Line 2175DWRR is its impressive capacity. This wine cooler can hold up to 30 bottles, accommodating a variety of wine types, from red and white to sparkling varieties. The thoughtful design includes adjustable shelves, allowing users to arrange their collection according to personal preference and bottle size. The shelves are designed to be robust yet gentle on the bottles, ensuring they remain secure while allowing easy access.

In terms of temperature control, the U-Line 2175DWRR offers a dual-zone refrigeration system. This technology is critical for wine preservation, as it allows for separate temperature settings for red and white wines, ensuring each type is stored under optimal conditions. The temperature can be easily adjusted via a digital interface, providing precise control over the environment inside the cooler.

The exterior design of the U-Line 2175DWRR is equally compelling. With a sleek stainless steel finish and a glass door, it exudes modern elegance while offering a clear view of the wine collection. The tempered glass door not only showcases the bottles beautifully but also provides protection against harmful UV rays that can affect wine quality. Additionally, the unit features subtle LED lighting that accentuates the interior without generating excess heat.

Sound is another consideration in the design of the U-Line 2175DWRR. It operates quietly, making it perfect for home use without causing disruptions during gatherings or quiet evenings.

For installation, the U-Line 2175DWRR is designed for freestanding use, offering flexibility in placement. It can fit seamlessly into various spaces, whether in a kitchen, dining area, or entertainment room.

In summary, the U-Line 2175DWRR stands out for its capacity, dual-zone temperature control, elegant design, and quiet operation. Ideal for both novice wine drinkers and connoisseurs, this model is a superb choice for those looking to enhance their wine storage capabilities while adding a touch of sophistication to their home. With its blend of technology and style, the U-Line 2175DWRR meets the demands of today's wine lovers.
Top Page Image Contents