!CAUTION

Use only U-Line Ice Machine Cleaner (part number 41978). It is a violation of Federal law to use this solution in a manner inconsistent with its labeling. Use of any other cleaner can ruin the finish of the evaporator and will void the war- ranty. Read and understand all labels printed on the package before use.

Ice machine cleaner is used to remove lime scale and other mineral deposits. Refer to the following steps for mineral deposit removal.

!CAUTION

Never use anything to force ice from the evaporator. Damage may result.

1.Set the cycle selector switch to OFF and allow the ice to melt off of the evaporator.

2.Remove all ice from the storage bin.

3.Remove inside front cover (see Figure 32).

FRONT COVER

4. Remove the overflow tube by lifting it up while using a slight back and forth motion to loosen it from the drain hole (see Figure 33). The water in the reservoir will flow down the drain.

5.Replace the overflow tube after all of the water has drained from the reservoir.

6.Move the cycle selector switch to the CLN position.

UL208

Figure 32

25