User’s Manual
INLET SCREEN CLEANING
The solenoid valve inlet screen must be cleaned at least once each year as follows:
1.Shut off the water at the water supply valve.
2.Remove front access panel to expose water solenoid valve.
3.Remove the entire hose con- nector from the solenoid valve.
4.Use a tooth brush to clean sediment from the inlet screen (see Figure 31). DO NOT remove the screen.
5.Attach the hose connector to the solenoid valve. Tighten connector securely with a pli- ers. Open the water supply valve and check for leakage at the hose connector.
UL005A
Figure 30
UL204C
Figure 31
AUTOMATIC CLEAN CYCLE
To maintain operational efficiency, clean the unit every six months (depending on water conditions more or less frequent cleaning may be necessary). If the ice maker requires more frequent cleaning, consult a qualified plumber to test the water quality and recommend appropriate treatment.
! WARNING !
Wear rubber gloves and safety goggles and/or face shield when handling Ice Machine Cleaner.
24