User’s Manual

ADJUSTING ICE THICKNESS

The ice thickness control is set to automatically maintain an ice bridge of 0.16-0.32 cm (1/16- 1/8 inch) thick. A dimple in each cube is normal (see Figure 28). If an adjustment is needed, perform the following steps:

ICE BRIDGE SHOULD BE￿ 1/16 - 1/8 INCH THICK

A DIMPLE IN EACH￿

CUBE CELL IS NORMAL

UL250

Figure 28

! WARNING !

Do not touch electrical wires. Disconnect power to the ice maker before making any ice thickness adjustments.

1.Disconnect power from the unit.

2.Remove front access panel (2 screws).

3.Locate the ice thickness adjustment dial on the control board (see Figure 29).

ICE THICKNESS￿

ADJUSTMENT ￿

DIAL

5-

4-

3-

2-

 

 

 

1-

 

 

 

0

 

 

 

1

5

4

3

2

DIAL IS FACTORY￿

SET TO +1

UL318A

Figure 29

22