
8.Install bottom hinge on cabi- net, opposite side, aligning flat edge of hinge with outer edge of unit. Partially tighten screws. See Figure 25.
9.Relocate plastic spacer/
bushing on bottom of door to |
|
opposite side, and place door |
|
on bottom hinge pin (see |
|
Figure 20). Clean out bush- |
|
ing hole in door bottom with |
|
a screwdriver if needed. | UL129 |
| Figure 25 |
10.Place door on lower hinge pin. Align flat edge of top hinge with outer edge of unit and fasten upper hinge to unit (4 screws). Partially tighten screws until door is aligned. See Figure 23.
11.Adjust door to assure proper seal. Tighten upper and lower hinge screws securely.
12.Replace four plastic plugs removed in step 5 into holes on top of unit. Replace screws in holes in bottom of unit, opposite side.
13.Reinspect door seal and alignment. Adjust if needed.
14.Reinstall grille (1 screw).
17