NOTE

When inspecting door align- ment, make sure that the light switch bracket (where equipped) makes contact with the light switch plunger (see Figure 27). Also, make sure that the door gasket is not pinched too tightly on the hinge side of the door.

UL130

Figure 27

CUSTOM DOOR PANEL INSERT

INSTALLATION

A custom door panel insert can be installed in most U-Line units. The door will accept a flat or raised panel. The maximum panel thickness where inserted into the door reveal (channel) is 1/4” thick. For raised panels, the depth of the reveal is 1/4” on the sides and bottom, and 1/2” on the top. The size of the door panel insert is shown below:

The door panel insert must not weigh more than 20 lbs.

Custom Door Panel Dimensions

Model

A

B

 

 

 

BI-95

13–15/32”

12–15/16”

BI-98

15–15/16”

13–15/16”

75

Series

28–5/32”

22–15/16”

75

SS

29–13/32”

22–15/16”

29

Series

21–13/32”

19–13/16”

15

Series

28–5/32”

13–15/16”

15

SS

29–13/32”

13–15/16”

SS - Stainless steel units

NOTE

Model SP18 does not accept custom door panels.

B

A

19