U-Line ULN-29RB-13 ULN-29RWH-15 manual Before Calling for Service, If Service is Required, Danger

Models: U-1075BEVS-13 U-1075BEVS-02 U-1075BEVS-00 U-1075WCS-15 U-1075BEVS-15 U-1075WCS-02 U-1075WCS-00 U-1075WCS-13 ULN-29RB-09 ULN-29RWH-13 ULN-29RB-02 ULN-29RWH-06 ULN-29RB-13 ULN-29RWH-15 ULN-29RB-00 ULN-29RB-15 ULN-29RWH-23 ULN-29RB-06 ULN-29RWH-09 ULN-29RWH-00 ULN-29RWH-25

1 19
Download 19 pages 39.67 Kb
Page 18
Image 18
8 Service

8 Service

Before Calling for Service

If you think your U-Line product is malfunctioning, read the OPERATION section of this guide to clearly understand the function of the control.

If the problem persists, read the NORMAL OPERATING SOUNDS and TROUBLESHOOTING GUIDE section of this guide to help you quickly identify common problems, and possible causes and remedies. Most often, this will resolve the problem without the need to call for service.

If Service is Required

If you do not understand a troubleshooting remedy, or your product needs service, contact U-Line Corporation directly. Contact information appears on the rear cover of this guide.

When you call, you will need your product Model and Serial Numbers. This information can be recorded inside the front cover of this guide. It also appears on the Model and Serial number plate located on the upper right or rear wall of the interior of your product.

Replacement Parts

When you need replacement parts, always request genuine U-Line replacements. U-Line designs and engineers products using components that work efficiently, and provide superior service life and performance. The use of aftermarket parts or components may affect the safety, operation, performance or durability of your product, and may also void its warranty.

Normal Operating Sounds

All models incorporate rigid foam insulated cabinets to provide high thermal efficiency and maximum sound reduction for its internal working components. Despite this technology, your model may make sounds that are unfamiliar.

Normal operating sounds may be more noticeable because of the unit’s environment. Hard surfaces such as cabinets, wood, vinyl or tiled floors and paneled walls have a tendency to reflect normal appliance operating noises.

Listed below are common refrigeration components with brief description of the normal operating sounds they make. NOTE: Your product may not contain all the components listed.

Compressor: The compressor makes a hum or pulsing sound that may be heard when it operates.

Evaporator: Refrigerant flowing through an evaporator may sound like boiling liquid.

Condenser Fan: Air moving through a condenser may be heard.

Automatic Defrost Drain Pan: Water may be heard dripping or running into the drain pan when the unit is in the defrost cycle.

Troubleshooting Guide

Before Calling for ServiceDANGER

ELECTROCUTION HAZARD. Never attempt to repair or perform maintenance on the unit until disconnecting the main electrical power.

Troubleshooting - What to check when problems occur:

Problem

Possible Cause and Remedy

Interior Light

The light bulb may be defective.(See MAINTENACE)

Does Not

 

Illuminate.

 

 

 

Light Remains

Turn off light switch if equipped (See OPERATION)

on When Door

Adjust light actuator bracket on bottom of door.

is Closed.

 

 

 

Unit Develops

Frost on the rear wall is normal and will melt during

Frost on

each off cycle.

Internal

If there is excessive build-up of 1/4” or more,

Surfaces.

manually defrost the unit.

 

Ensure the door is closing and sealing properly.

 

High ambient temperature and excessive humidity

 

can also produce frost.

 

 

Unit Develops

The unit is exposed to excessive humidity, moisture

Condensation

will dissipate as humidity levels decrease.

on External

 

surfaces

 

 

 

Product is

Product in contact with the rear wall may freeze,

Freezing.

ensure no product is touching the rear wall.

 

Adjust the temperature to a warmer set-point. (See

 

OPERATION)

 

 

Product is Not

Air temperature does not indicate product

Cold Enough.

temperature. See OPERATION - Checking Product

 

Temperature.

 

Adjust the temperate to a cooler set-point. (See

 

OPERATION)

 

Ensure unit is not located in excessive ambient

 

temperatures or in direct sunlight.

 

Ensure the door is closing and sealing properly.

 

Ensure the interior light has not remained on too

 

long.

 

Ensure nothing is blocking the front grille, found at

 

the bottom of the unit.

 

Ensure the condensor coil is clean and free of any dirt

 

or lint build-up.

 

 

15

U-Line 10 Series Service

Page 18
Image 18
U-Line ULN-29RB-13 ULN-29RWH-15 Before Calling for Service, If Service is Required, Replacement Parts, Danger, Problem