1

Install bottom hinge:

1.If you have a plate hinge, reorient the pivot screw so it protrudes the opposite direction form the hinge. Remove the pivot screw from the hinge. Turn the plate over and reinstall the screw.

2.Align hinge outer edge with cabinet. For models with a plate hinge, the flat edge of the hinge alignes with the outer edge of the cabinet.

Install two or three screws, depending on model. Replace nuts if used.

Prepare door for reinstallation:

For black or white doors:

1.Remove plastic hole plug from top of door handle and reinstall on opposite side.

2.Remove plastic hinge bushing on bottom of door and reinstall on opposite side. Clean out bushing hole in door bottom with a screwdriver if necessary.

 

3

 

 

 

4

 

 

2

 

Install top hinge, and door:

1

1.

Reorient the pivot screw so it protrudes the opposite

 

 

 

 

direction from the hinge. Remove the pivot screw from the

 

 

 

hinge. Turn the plate over and reinstall the screw.

 

 

2.

Hold door to keep it from falling.

 

Prepare door for reinstallation:

3.

Lift the door on to the bottom hinge.

 

For stainless steel models with glass doors:

4.

Align flat edge of the hinge with the outer edge of the unit.

 

3. Stainless glass doors are flipped upside down to be reversed.

5.

Install three or four screws, depending on model.

 

4. Lay the door on it’s side. Remove the plastic hole plug (1) and

Align and adjust the door:

 

install in the corner opposite of where it was removed.

1.

Align and adjust the door, see DOOR ALIGNMENT AND

 

 

 

5. Remove the plastic hinge bushing (2) and install in the corner

 

ADJUSTMENT.

 

opposite of where it was removed.

Install grille:

 

 

6. Remove the U-Line nameplate (3) from door. This will reveal

Install the grille, see MAINTENANCE section of this guide.

mounting holes for the door actuator bracket.

 

7.Remove door actuator (4) from door. Be sure to only remove the two screws holding the actuator to the door. Reinstall the actuator (4) on the opposite end of the door where the nameplate was removed.

8.Install new nameplate where the actuator assembly was removed.

9.Install screws into holes on opposite side, where the hinge was removed. Replace nuts if used.

U-Line Standrd Door Alignment and Reversal

16

Page 14 Page 16
Page 15
Image 15
U-Line ULN-29RB-06 ULN-29RWH-09 manual Install bottom hinge, Prepare door for reinstallation For black or white doors
Page 14 Page 16

U-1075BEVS-13, U-1075BEVS-02, U-1075BEVS-00, U-1075WCS-15, U-1075BEVS-15 specifications

U-Line has built a reputation for producing high-quality, premium appliances aimed at enhancing the culinary experience in homes and commercial spaces alike. Among their impressive lineup, the U-Line ULN-29 series models stand out for their innovative features, stylish design, and advanced technologies that cater to the needs of modern users.

The U-Line ULN-29RWH-00 and its variants, including ULN-29RWH-25, ULN-29RB-06, ULN-29RWH-09, ULN-29RB-15, ULN-29RWH-23, ULN-29RB-00, ULN-29RB-13, and ULN-29RWH-15, are undercounter refrigeration units that redefine convenience and accessibility in food and beverage storage. One of the most notable features of these models is their capacity to accommodate a remarkable number of items while maintaining a compact design suitable for any kitchen or bar area.

The U-Line ULN-29 series employs advanced refrigeration technologies such as dual refrigeration systems, ensuring precise temperature control and consistent airflow throughout the interior. This not only enhances the longevity of stored items but also provides optimal storage conditions for everything from craft beers to fine wines. With a temperature range from 34°F to 70°F, users can store a variety of items as per their specific requirements.

These units also incorporate energy-efficient LED lighting, which not only illuminates the interior but does so in an environmentally friendly manner. This modern lighting technology enables users to easily see and access their items while also conserving energy.

A versatile shelving system allows for custom configuration within the storage space, enabling users to adjust the interior layout to accommodate different sized bottles or food items. Additionally, the glass door provides a clear view of the contents, making it easy to identify items at a glance.

A focus on user convenience is evident in the features that include digital touchpad controls, which simplify temperature adjustments and monitoring. Furthermore, the models offer a quiet operation, making them perfect for open-plan living spaces or home bars where noise levels must be kept to a minimum.

In summary, the U-Line ULN-29 series offers an impressive combination of innovative design, cutting-edge technology, and user-friendly features. Its stylish appearance, efficient performance, and adaptability make it a desirable addition to any kitchen or entertaining space, catering to the needs of those who appreciate both function and sophistication in their home appliances. Whether for personal use or in a commercial setting, the ULN-29 series serves as a testament to U-Line's commitment to quality and excellence in undercounter refrigeration.
Top Page Image Contents