User’s Manual

NOTE

All U-Line units (except Stainless Steel models) have a zero clearance for the door to open (see Figure 1). See BUILT-IN INSTALLATION for additional clearance require- ments. Stainless Steel models require a minimum of 2- 1/2" door handle clearance when installed against a wall.

CABINET

OR WALL

DOOR

SWING

0"

CLEARANCE

NEEDED

UL124A

Figure 1

5.Position the unit to allow free air flow through the front grille (see Figure 2).

4

3

2

1

WARMER

5

6

OFF

 

ON

7

COLDER

INTAKE

EXHAUST

UL307

Figure 2

6.Wipe out inside of unit with a damp cloth.

7.Final finish of the wooden wine rack trim must be applied at least 24 hours before re-installing the wooden rack trim into the cabinet.

8.Be sure to install the Anti-Tip brackets. Follow the instructions pro- vided with the Anti-Tip bracket kit.

10