Ultratec 50FX20B, 50DX20B, 60FX20B TV Power button, Status button, MENU, SELECT, Cursor buttons

HOW TO USE THE REMOTE TO CONTROL YOUR TV

TV POWER button

Press this button to turn the TV set on or off.

STATUS button

Use the STATUS function to check the channel being received, or if it has stereo (ST) or second audio (SAP).

Audio			CHANNEL ID				Video Input
Broadcast	Stereo	Ant 10				Video:1
	St/Sa	YUTA		Time		DISC	When a laserdisc
		10:00Pm				10:00Pm	player is connected
		PIP Ant 12			PIP Ant 12
				Sub Picture
				Source
		Sport				Sport
			Theater
			Mode

MENU, SELECT, CURSOR buttons

All On-Screen Display features can be set or adjusted by using these buttons.

The MENU button will start the On-Screen Display.

The SELECT button will select different features when MENU is pressed.

The CURSOR buttons will highlight functions or adjust different features when MENU is pressed.

The CURSOR button will move PIP position when PIP is on.

CURSOR buttons will also give you acces to FAMILY FAVORITES On-Screen Display.

CHANNEL SELECTOR buttons

Enter two or three numbers to select channels. Enter “0” first for channels 1 to 9. For channels 100 and above, press the “1” button and wait for two seconds before pressing the last two digits of the channel.

Channel selection may also be performed by pressing CH up ( ) or down ( ).

You may also use these buttons for channel scanning. Press and hold the CH up ( ) or down ( ) buttons and the TV will start quickly scanning through the channels. Release the CH up ( ) or down ( ) buttons when the TV scans to the channel you wish to watch and the TV will tune to that channel.

NOTE: The TV may not receive some channels if you are not in the correct SIGNAL SOURCE mode. (see page 32)

LAST CHANNEL button

Use this button to select between the last two channels viewed. (Good for watching two sporting events, etc.)

Ant A 28

MINA

LAST CH

Ant A 30 MI

19