Underwater Kinetics XB9, 128-7376 manual Battery Installation, Cabling Interconnections

COVER LATCHES

1.Battery Installation

Your Boom Box can operate independently of AC power by installing 8 C-Cell batteries as follows:

NOTE: The batteries are bypassed automatically whenever the supplied AC Adapter is plugged into the DC 12V jack on the back panel.

BATTERY	BOTTOM OF
	BOOM BOX
COMPARTMENT
COVER

1.Turn the Boom Box upside down to access the battery compartment.

2.Push the battery cover latches forward and flip up the battery compartment cover to the open position.

3.Insert eight (8) C-Cell batteries observing battery polarity as shown; then close the cover.

2.Cabling Interconnections

You can begin to enjoy XM® Satellite Radio as soon as the Receiver and Boom Box Kit installation are complete. Set up your Audiovox XB9 by following the interconnect diagram.

NEGATIVEPOSITIVE

BATTERY
COMPARTMENT	NEGATIVE
(COVER REMOVED)

POSITIVE

3.Installing the Receiver in the XB9 Install the receiver as follows:

IMPORTANT: Make sure boom box power is off before installing and removing the XR9 Receiver.

a.Press the EJECT button at the top of the XB9; the spring-loaded mounting plate will tilt forward. Carefully line up the receiver rear spine grooves with the guide spines on the mounting plate; gently push the receiver down onto the plate.

	RECEIVER
RECEIVER	REAR SPINE
	GROOVES
REAR VIEW

-6-

128-7376

6 of 16