Underwater Kinetics 128-7376 manual Boom Box XB9 Controls

Boom Box XB9 Controls

The Audiovox XM® Boom Box XB9 provides Power ON/ OFF and VOLUME +/- pushbuttons, and a MODE pushbutton to toggle between Satellite Radio or an aux- iliary audio input signal. A power-on/low battery LED is also located on the front panel.

1.MODE Pushbutton: This pushbutton toggles between Satellite Radio and an external audio input signal (MP3, CD, etc.) present at the AUX input jack.

2.PHONES Jack: Accepts a stereo headphone jack to provide private listening capability for the Boom Box.

3.AUX Jack: Accepts an audio input signal from

an external audio device.		7
When using the AUX
audio input, turn
the Receiver off
to preserve bat
tery power. Adjust
the volume level
of the external	1	2 3 4	5 6

-5-

audio device to obtain an audio output from the XB9. The volume control on the external audio device should be set to mid-range.

4.VOLUME +/- Pushbuttons: Increase or decrease the volume of the audio output signal from the XB9. To increase the volume level, press the

+ pushbutton; to decrease the volume level, press the - pushbutton.

NOTE: When the XR9 receiver is installed, the Volume buttons on the Remote Control unit will control the audio output of the Boom Box.

5.Power On/Low Battery LED: The LED lights green when the Power On/Off pushbutton is pressed to apply power to the XB9.

6.Power On/Off Switch: When pressed, applies power to the Boom Box; the power on LED indicator (5) lights green.

7.EJECT Button: Press this button to release the spring-loaded XB9 mounting plate to install and remove the Receiver from the Boom Box.

128-7376

5 of 16