3. This topology is used when the Switch s IP address is not the
smallest in the subnet. If in Auto mode, the network will cause a Multi-
cast Storm from the client IGMP report. The configuration is used to
avoid that.
Note: We recommend that the switch with the smallest IP address be
set as the VOD server.
4. All switches must be in Disable mode when the VOD server is set up
as the IGMP Querier.
GVRP (GARP [Generic Attribute Registration Protocol] VLAN
Registration Protocol)
GVRP allows automatic VLAN configuration between the switch and
nodes. If the switch is connected to a device with GVRP enabled, you can
send a GVRP request using the VID of a VLAN defined on the switch. The
switch will automatically add that device to the existing VLAN.
5-4-3. Console Port Information1. Console is a standard UART interface to communicate with Serial Port.
Users can use the Windows HyperTerminal program to link to the
switch. Connect To -> Configure
Baud rate (bits/sec): 9600
Data bits: 8
Parity check: none
Stop Bits: 1
Flow control: none