5-4-5-1. Aggregator setting
System Priority: A value used to identify the active LACP. The switch
with the lowest value has the highest priority and is selected as the active
LACP.
1. Group ID: Users can create a link aggregation across two or more
ports. Choose the "group id" and click "Get".
2. LACP: If enabled, the group is a LACP static trunking group. If
disabled, the group is local static trunking group.
3. All ports support LACP dynamic trunking group. If connecting to a
device that also supports LACP, the LACP dynamic trunking group will
be created automatically.
4. Work Ports: The maximum number of ports that can be aggregated at
the same time is 4. If an LACP static trunking group is chosen, the
exceeding ports are standby and able to aggregate if the work ports
fail. If a local static trunking group, the number of ports must be the
same as group ports.
5. Select the ports to join the trunking group. If LACP is enabled, users
can configure the LACP Active/Passive status in each port.
6. Click Apply.