The front panel of the switch is displayed as below. There are 2 types
of fiber connectors available. These fiber connectors are SC or ST
Multi-mode and SC Single Mode.
Console Port: Console management can be done via the Console
Port. It requires a direct connection between the switch and an end
station (PC) via an RS-232 cable.
SmartGST-801M
Figure 2-2. The Front Panel of the SmartGST-801M
n 100Base-FX Fiber Port: There are three types of fiber
connectors available for the SmartGST-801M. The distance
for fiber cabling can be extended up to 2 kilometers with SC
or ST Multi-Mode and up to 30 kilometers with SC Single
Mode.
n GBIC port: This GBIC slot supports 3.3V Gigabit
Transceivers for Gigabit SX or LX only.
LED Indicators Figure 2-3. LED Indicators
There are three LED Indicators (LNK/ACT, FDX/COL) for each Fiber
port and one Power LED. The following table provides descriptions of
the LED statuses and meaning. They provide a real-time indication of
systematic operation status.
Console Port
Baud Rate: 9600,N, 8,1