UNICOM Electric FEP-31016T-1, FEP-31024T-1 Hardware Description, LED Indicators, Segment Bridge

Segment Bridge

For enterprise networks where large data broadcasts are constantly processed, these switches are an ideal solution for department users to connect to the corporate backbone.

In the illustration below, two Ethernet switches, with PCs, print servers, and a local server attached, are both connected to a Dyna-Switch. All of the devices in this network can communicate with each other through the Dyna-Switch. Connecting servers to the switch allows other users to access the server’s data.

Hardware Description

The Front Panel

The Front Panels of the Dyna-Switch/16 and 24 consist of 10/100Base-TX RJ-45 ports and LED Indicators.

	LK/ACT
Dyna-Switch/16	FD/COL
16 Port 10/100Base-TX Switch	LK/ACT
	FD/COL
	POWER

Dyna-Switch/24

LK/ACT

FD/COL

Server

h/16 Dyna-Switc

Printers

Workstations

Figure 6. Segment Bridge Application

24 Port

LK/ACT

10/100Base-TX Switch

POWER

Figure 2. Front Panel views of Dyna-Switch/16 and 24

The Rear Panel

The 3-pronged power plug is located at the rear panel of the switches as shown in the Figure 3. The Switch operates on AC in the range 100-240V AC, 50-60Hz.

Figure 3. Rear panel view of the Dyna-Switch/16 and 24

LED Indicators

The LED Indicators give real-time information of systematic operation status. The following table provides descriptions of the LED status and their meanings.

Per Device: Power

Per Port: LINK/ACT ( Link/Activity )

FDX/COL ( Full duplex/Collision )

For LED indication details, please refer to page 4.

6 3