F5.2
1/2

3 Gently press the shutter button.

hPress the shutter button gently, taking care not to move the camera.

hThe image that was captured appears on the monitor as long as the shutter button is kept pressed (post view).

4 Release your finger from the shutter button.

hThe captured image is recorded.

HINT

When the focus mode (page 74) is set to the 9-point focus mode B...

i A target mark & on the monitor shows the area the camera is focusing on.

i The camera automatically determines the correct focus by measuring from 9 different focus points within the shooting area. If the target mark is at a position that is different from the point you wish to focus on, you can refocus, for example, by changing the shooting angle.

i The large target mark appears when the camera focuses on a wide area in the center of the screen.

About the focus indicator

Focus indicator

Target mark

F5.2

1/102

Shutter speed

Aperture

Motion alert icon

i A green focus indicator appears when the subject is successfully focused, or a red focus indicator when the camera was not able to focus the subject.

The shutter speed and aperture are displayed

i The shutter speed and aperture settings are also displayed on the monitor. You can use them as a reference when shooting.

If the motion alert icon appears...

i During still image shooting, if the shutter speed is slow and the possibility that the image may be blurred due to camera shake becomes high, the motion alert icon may appear on the monitor. In this case, use a tripod to stabilize the camera when shooting, or set the flash operation mode to automatic (page 59).

i When shooting with the fireworks H scene function, the motion alert icon always appears, but this is normal.

English 38

Page 49
Image 49
Sanyo VPC-E10 Gently press the shutter button, Release your finger from the shutter button, About the focus indicator