Sanyo VPC-E10EX, VPC-E10GX instruction manual Date and Time Setting, Tab

DATE AND TIME SETTING

The camera will record the date and time an image is captured so that you can display them during playback. Therefore, before capturing images, make sure the correct date and time are set.

Example: To set the clock to 7:30 p.m. on December 24, 2008

1 Press the ON/OFF button to turn the camera on, and press the MENU button.

hThe Recording Menu appears (page 67).

2 Press the [o] button to select the

3tab, and press the [m] button. h The Option Menu appears

(page 103).

3 Press the [n] or [o] button to select “CLOCK SET”, and press the SET button or the [m] button.

hThe Clock Set Screen appears. h The current date and time

settings are shown.

h Follow the procedures below to enable or disable the date display during playback, to set the display format for the date, and to set the date and time.

h To return to the Option Menu, press the MENU button.

RECORDING MENU 1/2
TOUCH SENSOR	10M
RESOLUTION
COMPRESSION
FOCUS MODE
EXP MEASURE
ISO
OK	EXIT

3tab

OPTION MENU 1/2

CLOCK SET
SOUND
POST VIEW	1sec
BRIGHTNESS	0
LANGUAGE	NTSC
TV SYSTEM
OK	EXIT

CLOCK SET
DATE	2008/03/01
TIME	12:00
DISP	Y / M / D
OK

25English