Sanyo VPC-E10EX, VPC-E10GX Touch sensor menu, Mode, Focus mode menu, Light-measuring mode menu

1Touch sensor menu (page 69)

#: Set the shutter button touch sensor to ON.

$: Set the shutter button touch sensor to OFF.

2Resolution menu/video size menu (page 70) <Single-shot/sequential shots

mode>

k: Shoot at 3648 ⋅ 2736 pixels (single-shot mode only)

N: Shoot at 3648 ⋅ 2056 pixels (16:9 aspect ratio)

D: Shoot at 2816 ⋅ 2112 pixels

z: Shoot at 2288 ⋅ 1712 pixels

t: Shoot at 1600 ⋅ 1200 pixels

[: Shoot at 640 ⋅ 480 pixels

<Video clip recording mode> d: Shoot at 640 × 480 pixels 5: Shoot at 320 × 240 pixels <: Make an audio recording

(page 71)

3Compression rate menu (single-shot/sequential shots mode only) (page 73)

j: For shooting at low compression

0: For shooting at normal (moderate) compression

4Focus mode menu (page 74)

B: 9-point focus mode

C: Spot focus mode

p: The focus follows the focus-locked subject.

5Light-measuring mode menu (page 76)

X: Multi-section light- measuring

W: Center-weighted light- measuring

Y: Spot light-measuring

6ISO sensitivity menu (page 77)

t: Sets the ISO sensitivity automatically (ISO50 to 200).

*: ISO50

u: ISO100

v: ISO200

w: ISO400

6: ISO800

-: ISO1600

S: ISO2500

7White balance menu (page 79)

>: The camera will determine the setting automatically.

r: For photography in fair weather (sunny) conditions

o: In overcast conditions

p: Under fluorescent lighting

q: Under incandescent lighting

^: For setting the most accurate white balance

8Exposure correction menu (page 80)

h Change the brightness of the

image.

9Date imprint menu (page 81) h Imprint the capture date on still

images.

i When you specify multiple functions that cannot be simultaneously enabled, the function which was last set becomes the active setting, and the other settings accordingly change automatically.

English 68