Sanyo VPC-E10EX, VPC-E10GX instruction manual Connecting to a TV, Playback, Switch input to, Video

CONNECTING TO A TV

Connect the supplied AV interface cable from the USB/AV terminal on the digital camera to the AUDIO and VIDEO input terminals on the TV.

Supplied dedicated AV interface cable

To the USB/AV terminal

Playback

Yellow plug

To the VIDEO input terminal

Switch input to

VIDEO

White plug

To the AUDIO input terminal

i After connecting the digital camera to the television, set the TV input switch to VIDEO input.

i When an AV interface cable is connected, no image appears on the camera’s monitor.

i The playback method is the same as when viewing images on the camera’s monitor.

i The same playback procedure as when playing back with the camera is used to play back voice memos and audio recordings as well.

Voice memo playback: see page 39

Audio file playback: see page 72

CAUTION

Insert and pull out the cable carefully

i When connecting the cables, make sure that the cable plugs are correctly oriented and that they match the shapes of the terminal sockets on the devices. Push the plugs in straight when connecting them. If undue force is used to connect a cable, it may permanently damage the connector pins in the terminal socket.

i Do not use excessive force when connecting and disconnecting cables.

121English